Conveyor switch

Pull switch SPSL-2SPSL-2

The wire switch SPSL-2 is suitable for places with high dust content, and can also be used in hazardous gas environments such as gas and coal dust explosions underground in coal mines. It has stable and reliable performance, long service life, and is widely used.

  • Pull switch SPSL-2
  • ZHUOXIN
  • 24-380v
  • IP65
  • TT, Paypal, Credit card, Western union
  • +86-15163766288
  • The wire switch SPSL-2 is suitable for places with high dust content, and can also be used in hazardous gas environments such as gas and coal dust explosions underground in coal mines. It has stable and reliable performance, long service life, and is widely used.

Description

Conveyor switch

Pull switch SPSL-2 Pull switch SPSL-2 Pull switch SPSL-2 Explosion proof and dustproof Pull switch SPS-2-FM, 380VAC15A is used on the site of the belt conveyor. When an emergency accident occurs and the machine needs to be stopped, the machine will be started to immediately stop the belt conveyor and prevent the expansion of the accident. This switch is suitable for places with high dust content, and can also be used in hazardous gas environments such as gas and coal dust explosions underground in coal mines. It has stable and reliable performance, long service life, and is widely used. Manually reset and install the camshaft to rotate to a certain angle for self-locking positioning, equipped with mounting brackets, rope clamps, and supporting rings installed in pairs on the left and right sides of the belt conveyor. Drill a 12mm hole on the iron frame next to the belt conveyor, using M10× 40mm bolt fastening pull rope switch. This switch should be installed every 40 meters, and its position should be lower than the belt and convenient for on-site workers to use& nbsp; The pull rope is tied to the first arm, and it is recommended to use plastic coated steel wire rope with a diameter of 3-5mm. The steel wire rope is fixed with a rope clamp, and a support ring is installed every 3 meters to prevent excessive sag of the steel wire rope and ensure reliable rope pulling action. Under the premise of ensuring normal operation of the switch, try to tighten the rope as much as possible to reduce the sag deflection of the steel wire rope. For the climbing section of the belt conveyor, the distance between the pull rope switches and the length of the pull rope should be minimized as much as possible. Digital rebound tester DJHT225W09& SF-SM-M25 DH-2000A Rebound Data Processor& SF-SM-M25 Brand/Price& nbsp;KT-22  SF-PP-11.6  KU-1133  SF-PP-13.0  KU-2600  SF-PP-15.8  KU-2608  SF-PP-18.5  SK-6160  SF-PP-21.2  SK-6500  SK-6544  SF-PP-25.0  SK-6555  SF-PP-28.5  SK-4030  SF-PP-34.5   Flame retardant polypropylene hose SF-PP-42.5& nbsp; 

Tags

Get the latest price? We'll respond as soon as possible(within 12 hours)