.jpg)
The GEJ30 deviation sensor housing adopts HT250PK-II
The GEJ30 deviation sensor shell adopts HT250, which is mainly suitable for hazardous areas with mixed gases, as well as workplaces such as open-pit coal mines and coal preparation plants. It is used as a coal stacking signal detection device for the protection and control of mining belt conveyors, and can achieve deviation protection of belt conveyors
- The GEJ30 deviation sensor housing adopts HT250
- ZHUOXIN
- 24-380v
- IP65
- TT, Paypal, Credit card, Western union
- +86-15163766288
- The GEJ30 deviation sensor shell adopts HT250, which is mainly suitable for hazardous areas with mixed gases, as well as workplaces such as open-pit coal mines and coal preparation plants. It is used as a coal stacking signal detection device for the protection and control of mining belt conveyors, and can achieve deviation protection of belt conveyors
Description
GEJ30 deviation sensor housing adopts HT250. GEJ30 deviation sensor housing adopts HT250 I. Overview
& The GEJ30 deviation sensor is an intrinsically safe and simple mining equipment, with an outer shell made of HT250 cast iron; The output is a mechanical switch, which works stably and reliably. Mainly suitable for hazardous areas with mixed gases, as well as workplaces such as open-pit coal mines and coal preparation plants, it is used as a coal stacking signal detection device for the protection and control of mining belt conveyors, and can achieve deviation protection of belt conveyors< II. Main Technical Parameters& 1. Contact capacity: DC24V/0.5A< 2. Contact resistance: The contact resistance of the closed contact shall not exceed 0.1 Ω, and shall not exceed 0.2 Ω after vibration and impact< 3. First level action angle: 20 °; 3°； & nbsp; Reset angle: 15 °± 3°；< br/> Secondary action angle: 30 °± 3°； & nbsp; Reset angle: 20 °± 3°；< 4. The action force of the touch rod: 25N~55N< 5. Action performance: The sensor is subjected to action force, and when the probe rotates to the action angle, it should immediately act. The normally closed contact is disconnected, and the action is triggered& nbsp; After the force is eliminated, the probe automatically returns to its original position and immediately returns to its original position after passing the reset angle, with the normally closed contact closed< 6. The maximum angle of the probing action: ≥ 70 °< 7. The length of the transmission cable between the sensor and the host should be ≤ 500m, using MYQ3 × 1.0mm2 with safety standards and within its validity period, used in coal mines& nbsp; Mobile lightweight rubber sheathed flexible cable connection, cable parameters: R: 12.8 Ω/km, L: 0.8mH/km, C: 0.06? F/km.
8. The shell protection should comply with the protection level IP54 in GB4208< III. Scope of Application& nbsp; Mainly used to detect the deviation of the belt conveyor belt, and to protect the belt through programmable controller programming
& The GEJ30 deviation sensor is an intrinsically safe and simple mining equipment, with an outer shell made of HT250 cast iron; The output is a mechanical switch, which works stably and reliably. Mainly suitable for hazardous areas with mixed gases, as well as workplaces such as open-pit coal mines and coal preparation plants, it is used as a coal stacking signal detection device for the protection and control of mining belt conveyors, and can achieve deviation protection of belt conveyors< II. Main Technical Parameters& 1. Contact capacity: DC24V/0.5A< 2. Contact resistance: The contact resistance of the closed contact shall not exceed 0.1 Ω, and shall not exceed 0.2 Ω after vibration and impact< 3. First level action angle: 20 °; 3°； & nbsp; Reset angle: 15 °± 3°；< br/> Secondary action angle: 30 °± 3°； & nbsp; Reset angle: 20 °± 3°；< 4. The action force of the touch rod: 25N~55N< 5. Action performance: The sensor is subjected to action force, and when the probe rotates to the action angle, it should immediately act. The normally closed contact is disconnected, and the action is triggered& nbsp; After the force is eliminated, the probe automatically returns to its original position and immediately returns to its original position after passing the reset angle, with the normally closed contact closed< 6. The maximum angle of the probing action: ≥ 70 °< 7. The length of the transmission cable between the sensor and the host should be ≤ 500m, using MYQ3 × 1.0mm2 with safety standards and within its validity period, used in coal mines& nbsp; Mobile lightweight rubber sheathed flexible cable connection, cable parameters: R: 12.8 Ω/km, L: 0.8mH/km, C: 0.06? F/km.
8. The shell protection should comply with the protection level IP54 in GB4208< III. Scope of Application& nbsp; Mainly used to detect the deviation of the belt conveyor belt, and to protect the belt through programmable controller programming
Tags
Get the latest price? We'll respond as soon as possible(within 12 hours)