Zhuoxin

1. This product adopts an aluminum alloy casting shell, with high strength and light weight. 2. The switch adopts an imported travel switch, which has a large contact capacity, sensitive action, long service life, and good sealing< 3. The shell protection level reaches IP65 and can work for a long time in harsh environments< 4. This product has sensitive movements, high stability, and reliable performance< Installation and debugging: Fix the deviation switch on the bracket and then weld it onto the tape rack; The axis of the vertical roller is perpendicular to the plane of the tape, and the distance between the vertical roller and the edge of the tape is L=50; 100mm
The tape is located at 1/3 of the lower end of the vertical roller< Each 30m of tape can be equipped with a pair of (2) two-stage deviation switches for conventional belt conveyors: underground, cable support belt conveyors: ship loading and unloading systems; Stacking/reclaiming conveyor; Tilt and shuttle conveyors; Crane, excavator, boom limit: skirt feeder/conveyor: heavy-duty limit switch detects the deviation of the tape, which is a protective device for automatic alarm and shutdown of the tape machine control. Various belt conveyor equipment used in fields such as metallurgy, coal, cement and building materials, mining, electricity, ports, metallurgy, chemical industry, etc. Basic principle 1. The deviation switch is set on both sides of the conveyor belt, and the vertical rollers should be perpendicular to the plane of the conveyor belt edge, and the two sides of the conveyor belt should be located at 1/3 of the height of the vertical rollers. The distance between the vertical roller of the deviation switch and the normal position of the conveyor belt should be 50-100mm. The number of deviation switches should be determined based on the length, type, and layout of the conveyor. Generally, it should be set at the head, tail, convex arc section, concave arc section, and in the middle position of the conveyor. (Note: When the conveyor is long, one pair can be installed every 30-35 meters in the middle position of the conveyor.) 4. The deviation switch should be connected to the middle frame of the conveyor through an installation bracket. The switch bracket should be welded to the conveyor frame after the conveyor is installed. The deviation switch and the deviation switch bracket should be fixed with bolts< br/>