Zhuoxin

Stainless steel PXA-02GKH-A deviation switch. Stainless steel PXA-02GKH-A deviation switch. Stainless steel PXA-02GKH-A deviation switch. 1. The deviation switch is located on both sides of the conveyor belt, and the vertical rollers should be perpendicular to the edge plane of the conveyor belt, with both sides of the conveyor belt located at 1/3 of the height of the vertical rollers. The distance between the vertical roller of the deviation switch and the normal position of the conveyor belt should be 50-100mm. The number of deviation switches should be determined based on the length, type, and layout of the conveyor. Generally, it should be set at the head, tail, convex arc section, concave arc section, and in the middle position of the conveyor. (Note: When the conveyor is long, one pair can be installed every 30-35 meters in the middle position of the conveyor.) 4. The deviation switch should be connected to the middle frame of the conveyor through an installation bracket. The switch bracket should be welded to the conveyor frame after the conveyor is installed. The deviation switch and the deviation switch bracket should be fixed with bolts. The two-stage deviation switch consists of a hard contact and an address encoding circuit. Two micro switches are used for the first level deviation alarm hard contact and the second level deviation alarm hard contact, respectively, for the conveyor deviation alarm and emergency stop. When the address encoding two-stage deviation switch acts, the address encoding circuit will immediately send alarm information and address encoding through the communication circuit. Technical indicators Environmental temperature: -30 ℃ -+70 ℃; Relative humidity: not more than 85%
The first level action angle is 12 ° (15 °); Secondary action angle 30 ° (35 °); Limit angle 70 °
Number and capacity of contacts: 2 sets of normally open; 2 groups are normally closed; 5A/AC 380V
Protection level: IP67
Reset method: automatic reset
Reliability> 1000000 technical indicators Environmental temperature: -30 ℃ -+70 ℃; Relative humidity: not more than 85%
The first level action angle is 12 ° (15 °); Secondary action angle 30 ° (35 °); Limit angle 70 °
Number and capacity of contacts: 2 sets of normally open; 2 groups are normally closed; 5A/AC 380V
Protection level: IP67
Reset method: automatic reset
Reliability> 1000000 K34R6- (D) & nbsp;SC250x50 /SC250x50  HV-200S    SC250x75 /SC250x75  HN-5C  HV-200D    SC250x100 /SC250x100  HN-10C  HV400-200    SC250x150 /SC250x150  HV-04    HV-03    230660 /230660  HN-100  MVSD300-4E1    250660 /250660  HN-200  MVSD220-4E2    SC32x25 /SC32x25  HN-500/HN500  MVSD220-4E1    SC40x25 /SC40x25  HN-1B  SC50x25 /SC50x25  QE-04  HN-2B  SC63x25 /SC63x25  QE-03    HN-5B  SC80x25 /SC80x25  HN-10B  SC100x25 /SC100x25  HT-200  230622 /230622  HT-300  HT500/HT-500  250422 /250422  250622 /250622  HT-1000 &nbs p;HT-2000    230410 /230410  HT-3000  HT-5000  250410 /250410  HN-1  230610 /230610  HN-2  250610 /250610  HN-5  YQ250610（）/YQ-250610（）   HN-10  HN-20  230640/230640  230641/230641  230412/230412  250412/250412  230612/230612  250612/250612  YQ250612（）/YQ250612（）   230421/230421   250421/250421  / 230621   230621（）/230621（）   230420 /230420   250420 /250420   HT-20  HT-30  HT-50  230620 /230620  HT-100  250620/250620  230422 /230422  LX-J  /SC200x300  HT-10  /SC200x400  /SC200x450  /SC200x500  SC200x600/SC200x600  SC200x700/SC200x700  SC200x800/SC200x800  SC200x900/SC200x900  SC200x1000/SC200x1000  YQ250440（）/YQ250440   MVSD300-4E2    250440/250440  250640/250640  YQ250640（）/YQ-250640（）   250441/250441   YQ250441（）/YQ250441（  250641/250641  YQ250641（）/YQ250641（）