Zhuoxin

BKPT1-20-30 Corrosion and Explosion proof Runaway Switch BKPT1-20-30 Corrosion and Explosion proof Runaway Switch BKPT1-20-30 Installation and Adjustment 1. The Runaway Switch is installed on both sides of the conveyor belt, and the vertical rollers should be perpendicular to the edge plane of the conveyor belt, and the two sides of the conveyor belt should be located at 1/3 of the height of the vertical rollers. The distance between the vertical roller of the deviation switch and the normal position of the conveyor belt should be 50-100mm. The number of deviation switches should be determined based on the length, type, and layout of the conveyor. Generally, it should be set at the head, tail, convex arc section, concave arc section, and in the middle position of the conveyor. (Note: When the conveyor is long, one pair can be installed every 30-35 meters in the middle position of the conveyor.) 4. The deviation switch should be connected to the middle frame of the conveyor through an installation bracket. The switch bracket should be welded to the conveyor frame after the conveyor is installed. The deviation switch and the deviation switch bracket should be fixed with bolts. The deviation switch, also known as the anti deviation switch. It is a product used to detect the deviation of the conveyor belt of a belt conveyor. It is a safety protection device that automatically alarms and stops the conveyor belt in the event of deviation. The deviation switch has two levels of angles, and the commonly used ones are: the first level angle is 10, 12, and 20. The second level angle is 30, 35, and 45. Special corrosion-resistant BKPT1-20-30 explosion-proof deviation switch& 1. Environmental conditions for use: a. Environmental temperature: -30 ℃~70 ℃ b. Relative humidity not exceeding 85% 2. Main parameters are shown in the table below. Model: Action angle limit angle output method: Load current reset method: Reliability weight (Kg) Level 1 and Level 2 normally open and normally closed HFKPT1-12-30 12 ° 30 ° 70 ° 1 5A automatic reset ≥ 106 times 2.5 HFKPT1-10-45 10 ° 45 ° 70 ° 1 5A HFKPT1-20-35 20 ° 35 ° 70 ° 1 5A rope switch JSB-KLS-2, JSB-KLS-1，JLKJ-Z，JLKJ-S，JLK4-Z，JLK4-S，JLK3-Z，JLK3-S，JLK2-Z，JLK2-S， Bidirectional pull rope switch HFKLT2-2, HFKLT2-3，LSF-1，LSF-2，KLT2-3，KLT2-2，KLA-D-S，KLA-D-Z，KLB-T-Z，KLB-T-S，LSKG-2，KLT2-1，HFKLT2-1，FKLT2-Y，FKLT2-Z，KLT2A-1， Two stage deviation switch HHTSD-1, JSB-KPP-Z, JSB-KPP-S, JPKJ-Z, JPKJ-S, JPK2-Z, JPK2-S, HFKLT2-1, HFKPT1-N, JYB/KS-II, JYB/KS-I, HFKLT2-N, LSKG-I, FPK-10-45, FPK-20-35, FPK-12-30, FKLT2-Y, HFKLT2, KPT1-20-35, KPT1-10-45, KPT1-12-30, HFKPT1-20-35, HFKPT1-10-45, HFKPT1, JM KPT1-10-45, JM-KPT1-12-30, KPT1, HFKPT1-12-30, KPT-12-30 PPN-12-30, KPT-20-35, PPN-20-35, KPT-10-45, PPN-10-45, LLP2-1, LLP2-2, LLP2-3, LLP1-S, LLP1-Z, LLP3-S, LLP3-Z, LLP4-Y, LLP5-1, LLP6-1, LLP6-2, XCKMR54D1H29 (2), XCRA11 (2), XCRA18 (2), XCRA18 (2) 5. XCRT115, XCRT315 (4), XCK-MR202, LLD1-S, LLD1-Z, LLD2-1, LLD2-2, LLD2-3, LXP1D-120JPR (large aluminum wheel), SR-2D, XLPP-I, PPKG-12-30, PPKG-10-45, PPKG-20-35, HFPPKG-12-30, HFPPKG-10-45, HFPPKG-20-35, DPK-II, LSKG - Ⅰ, LSKG - Ⅱ, HFLSKG - Ⅰ, HFLSKG - Ⅱ, Tech oscilloscope: TPS2012, TPS2014，TPS2024，TPS2PBND，TPS2PBND2，TPS2PWR1，TPSBAT，TPSCHG，P5120，P5122，TDS3012C，TDS3014C，TDS3032C，TDS3034C，TDS3052C，TDS3054C，DPO3012，DPO3014，DPO3032，DPO3034，DPO3052，DPO3054，DPO3AUTO，DPO3VID，DPO3PWR，MSO3012，MSO4034，MSO3014，MSO3032，MSO3034，MSO3054，DPO/MSO3K DDU，DPO4034，DPO4054，DPO4104，MSO4034，MSO4054，MSO4104，DPO4034B，DPO4054B，DPO4104B，MSO4034B，MSO4054B，MSO4104B，DPO2012，DPO2014，DPO2024，MSO2012，MSO2014，MSO2024，DPO2CONN，TDS1001B，TDS1002B，TDS1012B，TDS1001C-SC，TDS1002C-SC，TDS1012C-SC，TDS2001C，TDS2002C，TDS3012C，TDS2004C，TDS2012C，TDS2014C，TDS2022C，TDS2024C，DPO2012，DPO2014，DPO2024，MSO2012，MSO2014，MSO2024，DPO2CONN，