Zhuoxin

Which is the cheaper working principle of Xiangtan type magnetic proximity switch KYCJ-1F? The KYCJ-1ZKYCJ series magnetic proximity switch is IP54. It adopts the principle of magnetic induction, is collision free and has strong capabilities. Mainly used to detect the position of moving objects. When the magnetic steel on the moving object passes through, the output contact of the proximity switch closes, and when it leaves, it opens. Widely applicable to places with sexual hazards such as coal mines, chemicals, and petroleum, it is a sensor in modern automatic control systems& nbsp;         1、 Working principle: The KSC1010 series magnetic proximity switch adopts the principle of magnetic induction, which is amplified by electronic power to achieve on/off control of external circuits. KSC1010 series magnetic proximity switches are used in conjunction with KY35 series control magnets. The switch is fixedly installed in the position that needs to be controlled, and the magnetic steel is directly installed on the outside of the controlled moving object. When the magnetic steel passes back and forth through the switch, it drives the switch to work. 2、 Technical parameter 1, technical indicator a, switch operating voltage range Ue: (AC) C）10V～250V。b、 Switch high working current IE: (AC, C) 1Ac, rated capacity of switch: 220W, switch contact form: 1 represents: normally open, 2 represents: normally closed, 3 represents: one normally open and one normally closed, 4 represents: directional memory, 5 represents: one open and one close conversion memory type. e, relative movement speed between switch and magnetic steel: 15m/sf, the action distance between switch and magnetic steel depends on the size of magnetic steel, the large action distance is 160mm2, the operating environment condition is a, the ambient temperature is -20 ℃~50 ℃ b, the altitude does not exceed 2000mc, and when the ambient air temperature is 25 ℃, the large relative humidity does not exceed 95%; 3. Can be used in working environments with splashing water, dust, corrosive media, and hazardous environments without strong magnetic fields. 3. Dimensions and weight: 1. Appearance and installation dimensions: (as shown in Figure 1) 2. Weight: KSC1010A-1/220 type; 9.60 kg, KSC1010B-1/220 type; 3.70  Kg, KSC1010G-1/220 type& nbsp;1.36  Kilogram 1. Installation and debugging 1. Check the integrity of the switch before installation. Connect the switch to the power supply and output it to a 25W light bulb or small relay. Align the magnetic steel vertically with the switch wire and move it back and forth within the specified distance. The switch can work in the contact form, proving good performance. If it cannot work in the contact form, check if the lead wire is connected incorrectly. (As shown in Figure 2) 2& nbsp; Installation precautions 1) In order to ensure the normal operation of the switch, it should be installed in a place without collision, impact, and strong magnetic field. The magnetic steel should be aligned with the switch wire for installation, and the left and right deviation should not exceed 10mm. 2) During installation, the mouthpiece should not be facing upwards. The four fastening screws on the top cover should be tightened evenly, and the waterproof sealing ring inside the cover should be tightly integrated with the switch body. 3) There is an&lquo; on the front of the switch; S&rquo; Signage, installation of magnetic steel; S&rquo; Dealing with switches; S&rquo;， No&lquo; on the switch; S&rquo; The marked magnetic steel can be installed arbitrarily. 4) The switch is cast with cables and cores, and the lead out cable is 1m. If the lead out cable is not long enough, the user needs to use a junction box to connect it excessively. 5) There should be no iron objects placed between the switch and the magnetic steel. 6) The installation position of the switch should avoid direct water spraying, foreign object collision, and impact as much as possible. If a protective cover or casing is required, iron materials cannot be used. 7) Electrical wiring for switches: (as shown in the wiring diagram inside the switch cover or on the back of the switch) 8) The matching and external dimensions of the magnetic steel and the switch contact form, as well as the installation dimensions, are shown in Table 1. Table 1 Control magnetic steel model matching switch contact form Working distance (mm) Control magnetic steel installation size LIBHSKY35M normally open and normally closed, one normally open and one normally closed, 1604001309254167618KY35M-113040001309239167618KY35M-2601601105134813581358.5KY35M-33013595411871108.5KY35M-4100240969233126813KY35M-58018513661351216211KY35P Direction memory conversion memory 170315265119341229010.5KY35P-114025020011941222510.5KY35P-270190110513481358.5KY35P-33013595411871108.5KY35P-411090140923492341216512KY35P-59018513661351216211