Zhuoxin

Cylindrical KGE-27 magnetic proximity switch, magnetic switch< Picture of KGE27 magnetic switch< Characteristics of KGE27 magnetic switch: cylindrical KGE-27 magnetic proximity switch, description of magnetic switch:< br>1、 Long operating distance:& A. Electromagnet with a large operating distance of 120mm& B. Permanent magnet with a large operating distance of 150mm& nbsp;
2、 Strong load capacity:& The CJK-1Z/T can directly carry a 3A (value) load with an intermediate relay transition Reliable and convenient& nbsp;
3、 Sensitivity, reaction speed: Response time less than 2.5ms& nbsp;
4、 Can work in extremely harsh environments:& A. Wide temperature range: -50 ℃ -+120 ℃& B. Has strong:& C. Waterproof and dustproof& nbsp;
5、 Reliable: As long as there is no strong magnetic field near the switch and it is installed according to the product technical manual requirements, it can ensure that the switch is 50% reliable& nbsp; No misoperation for ten thousand times, with a reliability of 100& nbsp;
6、 The working characteristics of the magnetic proximity switch: it is a non-contact switch that relies on magnetic induction to fundamentally solve the problem of misoperation caused by contact& nbsp;
7、 Wide application range: mainly used in coke oven equipment, dump truck equipment, and steel equipment& Product Description:< br>1、 A magnetic proximity switch is composed of two parts: a magnet and a switch contact. Magnets are divided into two types: electromagnets and permanent magnets, and can be selected according to the needs of control. The switch contacts are divided into three forms: normally open contact, normally closed contact, and transfer control contact, which are also selected according to actual needs. The magnet and contact should be installed on the same axis, and the distance between the two should be within the working distance. There should be no strong magnetic field around the switch contacts to avoid any impact. Electromagnets require direct current 24V power supply, and the two leads of the switch contacts should be connected in series to the power supply and load, and should not only be connected to the power supply, causing short circuiting and burning of the contacts. The wiring should be as short as possible and as far away from the wiring as possible< br>2、 Functional non memory magnetic proximity switch, non-contact, with on, off, or switching functions to achieve alignment, limiting, and various control purposes& KSC1010A-1/220 magnetic switch, magnetic proximity switch, switch< Magnetic proximity switch 1: normally open, 2: normally closed, 3: one normally open and one normally closed, 4: directional memory type, 5: one normally open and one normally closed conversion memory type,