Zhuoxin

TCK-4T Mining Intrinsic Safety Magnetic Sensor
The TCK and KGE series magnetic switches are non mechanical contact magnetic proximity switches, also known as mining magnetic switches. It consists of an iron-based amorphous magnetic ring sensor, a signal conditioning circuit, and an output switch circuit. When the magnetic detection body enters the induction area of the magnetic ring sensor, the electromagnetic field coupling effect, switch action, and output switch signal. The output signal reflects the position and movement direction of the detection body, serving as the travel control signal of the system. The TCK-4T magnetic mining sensor uses a pulse iron-based amorphous magnetic ring sensor, which adopts magnetic pulse compression technology and has magnetic sensitivity and resolution characteristics. At the same time, the switch has short recovery time, reliability, long lifespan, repeatable frequency operation, and no ionization and switch ablation problems. The circuit adopts technology to reduce signal false alarms and false alarms. Can be reliably used in complex working environments in mines. There are two types of products: universal and type. The sensor is installed on the end face of the switch, and all components are cured in the switch housing with epoxy resin sealing adhesive, which is moisture-proof, dust-proof, corrosion-proof, and shockproof. The shell leads out an eight core cable. On one side of the switch housing is a nameplate, and on the other side are two light-emitting diodes indicating the working status, which light up when the switch is activated. The shell is divided into two types: copper shell and stainless steel shell. Usually, it is necessary to use specified magnetic testing materials, including TS250, TS360, and TS500 (commonly used TS250). Product features: 1. Adopting gate pulse magnetic compression technology, energy-saving and stable, with a power consumption of 30 milliwatts. 2. Using circuit technology to reduce false alarms and false alarms in signals. 3. By adopting * technology, the magnetic switch can operate reliably over a wide detection range. 4. Strong product capability, good waterproof performance, temperature resistance, suitable for various complex environments. Magnetic switch performance parameters; Power supply voltage: AC85V-265V Product power consumption: 30MW Induction distance: 20CM-30CM (taking TS250 as an example) Output contact: 2 sets Load voltage: 750V Load current: 2A Speed response: Can meet the speed requirements of 30M/S. Working frequency: The mechanical life of the contacts can reach 00 times< TCK-1T magnetic switch, wellbore switch, mining magnetic switch, coal hopper level switch TS-BVX-NX; Integrated L (500mm); 220V output: Contact capacity: AC250 coal blockage sensor GX-1Z, TCK-4T mining intrinsic safety magnetic sensor