Zhuoxin

UK-2 Bidirectional Holding Magnetic Switch Overview
UK-2 Bidirectional Holding Magnetic Switch is widely used for liquid level regulation and warning control of opening and sealing various containers in departments such as chemical, petrochemical, manufacturing, power plants, food industry, environmental protection equipment, and civil construction. It is a simple, reliable, and easy to operate liquid level switch. UK-2 Bidirectional Holding Switch Bidirectional Holding Magnetic Switch 【 Brand HANGRONG/Zhuoxin 】 Structural Principle
  The UK-2 bidirectional holding liquid level warning switch is in the same magnetic coupling system as the UZ series magnetic liquid level gauge, and is fixed on the outer side of the liquid level gauge cylinder with a hook. When the magnetic float is below the switch, the switch is in the OFF state; When the float rises from the stainless steel tube and passes through the magnetic control switch, the switch is driven by the magnetic field inside the float and remains in the ON state. When it descends, the magnetic control switch is in the OFF state and remains in the OFF state. Reverse installation of magnetic switches results in opposite switch states< Technical parameters: Contact form:; Dry spring contacts&
Dry spring contact capacity: AC 220V& nbsp; 0.3A
               Intrinsically safe 24VC; 0.2A
Contact life: 107 times
Warning area: 150mm
Environmental temperature: -30~80 ℃ (M) - 30-150 ℃ (MT)
Medium temperature: 250 ℃< Connection cable: M-type: 1m PVC; MT type: 1m silicone rubber
Power inlet: ordinary waterproof Pg11; Type: M20× 1.5 (internal thread)
: <
Instructions for Use
1. Warning switches are mainly used in instrument systems, and switch signals can be directly input into typical warning systems
2. Warning switches are reed type. If driving high-power loads (such as high-power light signs, bells, etc.), a conversion amplifier can be added, and the JTX relay can drive the load to improve system reliability.
< 3. Users can choose between normally open (SPST reed) or normally open/normally closed (SPT reed) according to their needs< 4. There is no difference between the upper limit switch and the lower limit switch, and users can wire according to their own requirements and the above characteristics. For example, the upper limit switch is connected to NO, and the lower limit switch is connected to NC< 5. The warning position can be adjusted by the user. For multi-point warning methods, please provide the exact distance between each limit switch when placing an order< If the warning status is incorrect during installation and use, please install the magnetic switch in the opposite direction< 7. Intrinsic grid configuration. GUG60 mining magnetic switch ZWL3-EA2/5 bidirectional rope switch ZLX series bidirectional rope switch SRE-TS-WO1 belt deviation switch proximity switch 220V rope switch EXKLT2 deviation switch KPT1 chute blockage switch L101B slip switch EXH-S longitudinal tear switch EXZI-K non-contact proximity switch Ni10-G18sk-AZ3 stall switch Ni15-M30-AZ3x