Zhuoxin

Mining accessory positioning switch; Explanation of TCK Magnetic Switch's Application in Mining Machinery with Magnetic Induction Switch< The TCK-T type magnetic switch of Zhuoxin Mine has been widely used in mining machinery and other industries, and has received praise from users. The TS series magnets are used in conjunction with TCK magnetic switches, and the company has TS250, TS360, TS500 and other signal magnets. The TCK series magnetic switch * can be used for wellbore switches. The TCK-T type magnetic switch uses sensitive and reliable magnetic sensors and microelectronic devices, with some magnetic sensitivity, high resolution, and wide response frequency. The circuit design adopts redundant structure and technology, and adopts a switching power supply with a power supply voltage of 50-60Hz; 85-265VAC. All circuits are cured with epoxy resin inside cast aluminum or cast copper switch shells, fully sealed, waterproof, and resistant to impact. Due to the comprehensive use of a series of design and process technologies, TCK magnetic switches have achieved high technical indicators and performance, and are suitable for various mines. There are five main performance indicators for judging magnetic induction switches: 1& nbsp; The connecting cable used: Check whether the wires inside the connecting cable are copper wire or tin plated wire. Tin plated wire has much better performance than copper wire and may be more expensive (10 core cable). Generally, in order to save costs, cheaper copper core wires are used. 2. & nbsp; Reaction of magnetic switch to magnet: When the magnetic induction switch is used in conjunction with TS250 magnet, the distance between the magnet and the magnetic switch is 245mm~255mm. Products larger than 260mm and smaller than 240mm are not qualified products. 3. & nbsp; Product appearance: The appearance should be designed to be beautiful, clean, and the surface of the sealed gel should be flat and shiny. 4. & nbsp; Unipolar magnetic switches have a positioning window of *. The establishment of a positioning window can significantly improve the positioning of the magnetic switch on the cage. The discrimination method for positioning window: When a magnet approaches the magnetic switch from far to near, the distance between the magnet and the magnetic switch is represented by L when L> At 255mm, the magnetic switch does not operate, and at 100mm< l<255mm， The magnetic switch is in the active state when l< 100mm magnetic switch in non operating state; This can control the installation position on site and improve the positioning of the magnetic switch. So when installing a magnetic switch, the distance interval between the magnet and the magnetic switch should be (120mm, 220mm)< span="" style="line-height: 2; wor-wrap: break-wor; wor-break: break-all; color: rgb(41, 41, 41); max-with: 680px !important; 5. The influence of geomagnetism on magnetic switches: A good magnetic switch should have good ability, and an important indicator for judgment is the influence of geomagnetism on magnetic switches. The testing method is to take the TS250 magnet as an example, point the head of the magnetic switch to the south and north of the geography, and then align the S pole of the TS250 magnet with the head of the magnetic switch for testing. In both cases, the distance between the magnetic switch and the TS250 magnet should be within the range of (245mm, 255mm), with an interval of 10mm. The shorter the interval, the smaller the influence of geomagnetism, and in good cases, the interval will be around 5mm. If the interval is greater than 15mm under the influence of geomagnetism, it is not a qualified good product. Our company's series of mining magnetic switches are welcome to purchase. Mining accessories positioning switches; Principle of Magnetic Induction Switch XTR-ELS-2 Plastic Case WSK-FS22 Stainless Steel Waterproof Rope Switch LW101-S-1 Manual Reset Mercury Tilt Switch; GUH10 mining explosion-proof proximity switch; C24V 4-20mA 0-10mm magnetic waterproof deviation switch NST1-12-30 magnetic waterproof deviation switch NST1-10-45 magnetic waterproof deviation switch NST1-20-35TCK-1T magnetic switch TCK-1P magnetic induction switch KGE1-1AP-SK mining sealed magnetic induction switch