Zhuoxin

The RF admittance switch adopts advanced RF admittance technology, overcoming the defect that capacitive level switches cannot eliminate the influence of conductive hanging materials. The instrument operates reliably, and all technical indicators meet the international level of similar products. It is widely used for alarm and control of liquids, slurries, dust, material levels, and two types of liquid interface liquid levels. In addition, the product has added on-site working status indication, making it a very stable and reliable liquid level switch with a very high cost performance ratio< Br/>








The RF admittance switch is composed of a sensor electronic unit, which mainly includes three parts: a measuring probe, a shielding electrode, and a grounding terminal. The height of the material is reflected by the change in admittance between the probe and the container wall. When the material reaches the switch operation point, the electronic unit responds, drives the relay, and outputs a switch signal. Shielding electrodes can prevent errors caused by hanging materials on the electrodes. The action signal only outputs the switch control signal when the material actually reaches the set point< Br/>






Power supply: 220VAC, 50/60Hz/24VDC, 100mA

Sensitivity: 0.3pF or lower

Working temperature: -20~180 ℃

Environmental temperature: -40~80 ℃

Work pressure: -0.1~2.5MPa

Output: DPDT relay (bipolar double throw)

Contact capacity: 220VAC, 5A inductive, 3A inductive

Response time: Standard: 0.2 seconds

Delay: 0.2-50 seconds adjustable

Electrical interface: M20× 1.5

Protection level: IP65

Process connection: Standard: 3/4; NPT thread/1” NPT thread

HG20592-20635-97 DN25 and above, other flange standards

Please specify when ordering (such as GB, JB/T, HGJ, ANSI, DIN, etc.)< Br/>
Cable length: The maximum distance between the remote sensor and the electronic unit is 45 meters. If the user does not specify,

Factory 3 meters

Wetting materials: 304/316SS and PTFE

Junction box material: aluminum alloy





&Nbsp;